Service manual

Groundsmaster 3280−DPage 4 − 6Diesel Engine

Air Cleaner

Figure 4

1. Air cleaner assembly

2. Flat washer (2 used)

3. Lock nut (2 used)

4. Intake air hose

5. Hose clamp

6. Air hose

7. Cap screw (2 used)

8. Air cleaner mount

FRONT

RIGHT

Removal

1. Park machine on a level surface, lower cutting deck

(or implement), stop engine, engage parking brake and

remove key from the ignition switch. Raise hood.

2. Remove air cleaner components as needed using

Figures 4 and 5 as guides.

3. See Traction Unit Operator’s Manual for air cleaner

service procedures.

Installation

IMPORTANT: Any leaks in the air filter system will

allow dirt into engine and will cause serious engine

damage. Make sure that all air cleaner components

are in good condition and are properly secured dur-

ing reassembly.

1. Reassemble air cleaner system using Figures 4 and

5 as guides. Make sure that vacuator valve is pointed

down after assembly.

Figure 5

1. Bracket

2. Cover

3. Vacuator valve

4. Pipe nipple

5. Indicator