User guide

CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B 42
Hardware
Figure 4-11. Kit Current Consumption Measurement
Note: Do not remove the current measurement jumper J12 while the kit is powered. This can dam-
age the MBR3 silicon.
4.3.4 Button Sensors and Proximity Loop Sensor
The kit has four CapSense buttons (two circular buttons of 10-mm diameter and two circular buttons
of 11-mm diameter) and one proximity loop onboard, as Figure 4-12 shows. These sensors can be
driven by the CY8CMBR3116 device to perform touch and proximity detection.