User guide

CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B 50
Hardware
4.3.9 Push Button to Reset CY8CMBR3116
The kit contains a mechanical reset push button, SW2, to reset the CY8CMBR3116 device, as
shown in Figure 4-19.
Figure 4-19. Push Button Reset Switch
4.3.10 I
2
C Selection Jumpers
The I
2
C communication lines (SCL and SDA) can be connected to either the onboard USB-I
2
C
bridge (PSoC 5LP) or to the I
2
C pin location on the Arduino header (J3.9 and J3.10). See
Figure 4-18 for the schematic snippet.