User guide

CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B 66
Configuration Files and Example Projects
Figure 5-25. Building the Project from PSoC Creator
4. To program, connect the PSoC 4 Pioneer Kit to a computer using the USB cable connected to the
USB port/J10 of the PSoC 4 Pioneer Kit.
5. Choose Debug > Program in PSoC Creator (see Figure 5-26).
Figure 5-26. Programming the Device from PSoC Creator
6. The CY8CKIT-042 is detected as "KitProg/<Kit number>” and is seen in the Select Debug Target
window. If the PSoC 4 device is not yet acquired, PSoC Creator opens the Programming window.
Select the KitProg and click the Port Acquire button (see Figure 5-27).