Owner`s manual

ManualsBrandsUltra Start ManualsAutomotive3295Series

WARING: NEVER USE AN AUTOMATIC TRANSMISSION

STARTER IN A MANUAL TRANSMISSION VEHICLE

REV.2011.7.30

AUTOMATIC AND MANUAL TRANSMISSION MODELS*

*MUST USE M SERIES REMOTE STARTER!

Advanced Remote Starters & Vehicle Security Systems

90/ 95 SERIES

Summary of content (28 pages)

PAGE 1
REV.2011.7.
PAGE 2
90 & 95 SERIES IMPORTANT NOTES...........................................................................................PAGE 3 QUICK VIEW OPERATIONS LCD 2WAY............................................................PAGES 4-8 LOCK UNLOCK TRUNK START STOP ETC. QUICK VIEW OPERATIONS 1WAY REMOTE....................................................PAGES 8-9 LOCK UNLOCK TRUNK START STOP ETC. QUICK VIEW OPERATIONS LED 2WAY............................................................
PAGE 3
90 & 95 SERIES IMPORTANT NOTES BEFORE YOU START
PAGE 4
90 & 95 SERIES PAGE 4 LCD 2 WAY REMOTE Basic Remote Functions THE LCD REMOTE DISPLAYS THE CURRENT STATUS OF YOUR SYSTEM USING BOTH ICONS AND TEXT ON ITS UNIQUE LCD DISPLAY. Basic Remote Functions # LOCK/ ARM ALARM UNLOCK PROGRAM ULTRA UNLOCK/ DISARM ALARM 1 2 3 ON OFF REMOTE START/ STOP TRUNK RELEASE / START STATUS # STATUS UPDATE/ PGM MODE *RESERVATION MODE ON M SERIES.
PAGE 5
90 & 95 SERIES PAGE 5 2 WAY REMOTE OPERATIONS DISPLAY BUTTON PRESS AUDIBLE FUNCTION 1 LOCK 1 BEEP / 1 BEEP LOCK THE DOORS & ARM THE ALARM* *ALARM MODELS ONLY. LOCK - PRESS & HOLD 4 SECONDS SERIES OF BEEPS ACTIVATES THE PANIC MODE FEATURE. PRESS AND RELEASE PRESS AND RELEASE (WITHIN 2 SECONDS) 1 BEEP PAUSE 1 BEEP ACTIVATES THE CONSTANT LOCK OUTPUT FEATURE* *THE LOCK OUTPUT WILL STAY ON FOR 4 SECONDS. ACTIVATES WINDOW ROLL UP ON SELECT VEHICLES.
PAGE 6
90 & 95 SERIES PAGE 6 2 WAY REMOTE OPERATIONS DISPLAY BUTTON PRESS AUDIBLE FUNCTION 1 AUX 1 PRESS AND HOLD TOGETHER 1 BEEP / 3 BEEPS AUXILIARY 1 OUTPUT. ACTIVATES AS LONG AS THE BUTTONS ARE HELD (5 SECONDS MAX). PRESS AND HOLD TOGETHER 1 BEEP / 2 BEEPS AUXILIARY 2 OUTPUT. DEFAULT 5 SECOND OUTPUT. 1 AUX 2 # *THE AUXILIARY OUTPUTS CAN BE USED TO ACTIVATE ADDITION FEATURES SUCH AS POWER SLIDING DOOR CONTROL, SUN ROOF OPEN/CLOSE OR EVEN WINDOW ROLL-UP.
PAGE 7
90 & 95 SERIES PAGE 7 2 WAY REMOTE OPERATIONS DISPLAY BUTTON PRESS 1 AUDIBLE KEY- PRESS AND HOLD FOR 3 SECONDS TILL REMOTE BEEPS THEN RELEASE START 1 BEEP PAUSE TONE FUNCTION ACTIVATES THE REMOTE CAR STARTER FUNCTION. THE DEFAULT RUNTIME IS 15 MINUTES. MANUAL TRANSMISSION- RESERVATION MODE MUST BE SET TO REMOTE START THE VEHICLE. IF THE VEHICLE DOES NOT START A START FAULT CODE WILL BE DISPLAYED. THE START FAULT WILL CLEAR THE NEXT TIME THE SYSTEM IS LOCKED OR UNLOCKED.
PAGE 8
90 & 95 SERIES PAGE 8 1 WAY REMOTE OPERATIONS DISPLAY LOCK BUTTON PRESS HONKS/ FLASH FUNCTION 1 SECOND 1 LOCK DOORS/ ARM ALARM* 3 SECONDS 1 ACTIVATE PANIC MODE PRESS 2 TIMES 1 ACTIVATE CONSTANT LOCK MODE 1 SECOND 2 UNLOCK DOORS/ DISARM ALARM* PRESS 2ND TIME WITHIN 3 SECONDS 2-2 ACTIVATES DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
PAGE 9
0 & 95 SERIES PAGE 9 1 WAY REMOTE OPERATIONS DISPLAY + + AUX 1 + AUX 2 USER NOTES BUTTON PRESS PRESS TOGETHER THEN RELEASE PRESS TOGETHER THEN RELEASE HONKS/ FLASH 1 2 FUNCTION ACTIVATES SILENT LOCK WITHOUT HONKS ACTIVATES SILENT UNLOCK WITHOUT HONKS PRESS TOGETHER FOR 3 SECONDS 2 ACTIVATES THE AUXILIARY 1 OUTPUT FOR 5 SECONDS. PRESS TOGETHER FOR 3 SECONDS 2 ACTIVATES THE AUXILIARY 2 OUTPUT FOR UP TO 5 SECONDS.
PAGE 10
90 & 95 SERIES PAGE 10 LED 2WAY REMOTE’S DISPLAY LOCK BUTTON PRESS LED & BEEPS FUNCTION 1 SECOND 1 LOCK DOORS/ ARM ALARM* 3 SECONDS 1 ACTIVATE PANIC MODE PRESS 2 TIMES 1 ACTIVATE CONSTANT LOCK MODE 1 SECOND 2 UNLOCK DOORS/ DISARM ALARM* PRESS 2ND TIME WITHIN 3 SECONDS 2-2 ACTIVATES DRIVER’S DOOR PRIORITY UNLOCK FEATURE.
PAGE 11
90 & 95 SERIES PAGE 11 LED 2WAY REMOTE’S DISPLAY + + AUX 1 + AUX 2 USER NOTES BUTTON PRESS PRESS TOGETHER THEN RELEASE PRESS TOGETHER THEN RELEASE LED & BEEPS 1 2 FUNCTION ACTIVATES SILENT LOCK WITHOUT HONKS ACTIVATES SILENT UNLOCK WITHOUT HONKS PRESS TOGETHER FOR 3 SECONDS 2 ACTIVATES THE AUXILIARY 1 OUTPUT FOR 5 SECONDS. PRESS TOGETHER FOR 3 SECONDS 2 ACTIVATES THE AUXILIARY 2 OUTPUT FOR UP TO 5 SECONDS.
PAGE 12
90 & 95 SERIES OR PAGE 12 PRESS & HOLD 1. Press and Hold the Start button for 3 seconds. 2. The park lights will flash and the siren**/ horn will chirp once. 3. The vehicle will remote start. The park lights will stay on during run time*** See diagnostic chart if your vehicle fails to start. Note- Manual transmission vehicles must be set for reservation mode before remote starting.
PAGE 13
90 & 95 SERIES PAGE 13 OR PRESS & HOLD OR PRESS & HOLD OR PRESS & RELEASE PRESS & HOLD *Press # twice on manual transmission models.
PAGE 14
90 & 95 SERIES OWNER'S MANUAL PAGE 14 SYSTEM PROGRAMMING SYSTEM OPERATIONS- Menu 1 RESERVATION MODE REQUIRED ON MANUAL TRANSMISSION VEHICLES ONLY. RESERVATION MODE MUST BE SET TO REMOTE START THE VEHICLE. RESERVATION MODE TYPE -1 (DEFAULT SETTING) 1) PLACE THE TRANSMISSION INTO NEUTRAL (VEHICLE RUNNING). 2) APPLY THE PARKING BRAKE. 3) PRESS AND RELEASE THE # BUTTON ON THE REMOTE. THE PARK LIGHTS WILL FLASH AND THE HORN (IF CONNECTED) WILL HONK TWICE. 4) REMOVE THE KEY. (THE VEHICLE WILL STAY RUNNING).
PAGE 15
90 & 95 SERIES PAGE 15 SYSTEM OPERATIONS SYSTEM PROGRAMMING - Menu 1 OWNER'S MANUAL PRESS & RELEASE ARM SYSTEM / LOCK DOORS Programmable. OR 1. Press and hold the Trunk Release button on *Hold the Trunk button on LCD 2way models. See 2way operations.
PAGE 16
90 & 95 SERIES OWNER'S MANUAL PAGE 16 SYSTEM PROGRAMMING SYSTEM OPERATIONS- Menu 1
PAGE 17
90 & 95 SERIES PAGE 17 SYSTEM OPERATIONS SYSTEM PROGRAMMING - Menu 1 OWNER'S MANUAL SERVICE MODE This feature is to be used when the vehicle is being serviced or if the remote transmitter is lost or is not communicating with the system. This will disable the remote starter from activating and disable the alarm of alarm models.
PAGE 18
90 & 95 SERIES PAGE 18 OWNER'S MANUAL SYSTEM PROGRAMMING SYSTEM OPERATIONS- Menu 1 TEMP START MODE STEP 1- TURN ON LOW TEMP MODE TO SET LOW TEMP MODE ON M RA OG PR MP TE HOLD LOCK AND START FOR 5 SECONDS. THE PARK LIGHTS WILL TURN ON. THE REMOTE WILL DISPLAY TEMP ON. PRESS AND RELEASE THE REMOTE BUTTON ACCORDING TO THE TEMP SETTING TO BE SET. *SEE BELOW. A TR UL STEP 2- SELECT THE DEFAULT TEMPERATURE SETTING TEMP ADJUSTMENT PRESS A REMOTE BUTTON TO SELECT SETTING. PRESS LOCK.
PAGE 19
90 & 95 SERIES PAGE 19 SYSTEM OPERATIONS SYSTEM PROGRAMMING - Menu 1 OWNER'S MANUAL M-1234 PROGRAM ULTRA RUN TIME ADJUSTMENT TO ENTER PROGRAM MODE PRESS AND HOLD THE # BUTTON ON THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 3 TIMES THEN DISPLAY “PROGRAM” & “M-1234". PRESS START TO CONTINUE. PROGRAM ULTRA ON TIMER15 RUN ULTRA PRESS START TO GO TO RUN TIME ADJUSTMENT +# PROGRAM CLOCK SET MODE ULTRA P 12:35 RUN TIME ADJUSTMENT PRESS UNLOCK BUTTON TO CHANGE TO 4 MINUTES.
PAGE 20
90 & 95 SERIES PAGE 20 OWNER'S MANUAL SYSTEM PROGRAMMING SYSTEM OPERATIONS- Menu 1 SHOCK SENSOR ADJUSTMENTS (2WAY ALARM MODELS) THE SHOCK SENSOR SENSITIVITY IS SET USING THE REMOTE PROGRAM MODE FEATURE. ALARM MODELS ONLY. M-1234 PROGRAM ULTRA ENTER REMOTE PROGRAM MODE TO ENTER PROGRAM MODE PRESS AND HOLD THE # BUTTON ON THE REMOTE FOR 4 SECONDS. THE REMOTE WILL BEEP 1 TIME AND THEN 3 TIMES.
PAGE 21
90 & 95 SERIES PAGE 21 SYSTEM OPERATIONS SYSTEM PROGRAMMING - Menu 1 OWNER'S MANUAL 3295 - PAGER MODE ON/OFF To increase battery duration on non alarm 2way systems it is recommended that the user switches the Pager Mode feature of the remote to OFF. PROGRAM 1 ON OFF TIMER PROGRAM ULTRA Press & Release. Press & Release. 1 2 3 ON PAGER PROGRAM 1 2 3 OFF PROGRAM ULTRA Press & Release. PAGER ULTRA 1 M--1234 1 A 9:45 ULTRA A 9:45 Press & Release.
PAGE 22
90 & 95 SERIES PAGE 22 OWNER'S MANUAL SYSTEM PROGRAMMING - Menu 1 LCD 2WAY REMOTE PROGRAM MODE ULTRA REMOTE PROGRAM MODE ALLOWS THE USER TO SET FEATURES ON OR OFF FROM THE REMOTE TRANSMITTER. SEE THE INSTRUCTIONS BELOW TO CHANGE A USER SETTING. M-1234 PROGRAM TO ENTER PROGRAM MODE PRESS AND HOLD THE # BUTTON ON THE REMOTE FOR 4 SECONDS. THE REMOTE WILL PLAY THE PROGRAM MODE TUNE.
PAGE 23
90 & 95 SERIES PAGE 23 LCD 2WAY - Menu 1 SYSTEM PROGRAMMING OWNER'S MANUAL REMOTE PROGRAM MODE ULTRA ON CAR 1 PROGRAM SWITCH FROM CAR 1 TO CAR 2 PRESS THE LOCK BUTTON TO SELECT CAR MODE PRESS THE UNLOCK BUTTON TO SELECT CAR 1 PRESS THE START BUTTON TO SELECT CAR 2 TIMER HORN PROGRAM ULTRA ON ULTRA PRESS LOCK TO GO TO NEXT SETTING OR STATUS TO EXIT.
PAGE 24
90 & 95 SERIES PAGE 24 OWNER'S MANUAL SYSTEM PROGRAMMING - Menu 1 LCD 2WAY ALARM TRIGGERS & PAGER MODE WHEN THE ALARM IS TRIGGERED THE SYSTEM WILL PAGE THE REMOTE WITH THE SPECIFIC ALARM TRIGGER.
PAGE 25
90 & 95 SERIES PAGE 25 LCD 2WAY - Menu 1 SYSTEM PROGRAMMING OWNER'S MANUAL FAULT CODE VIA PAGER TACH FAULT THIS FAULT WOULD OCCUR IF THE VEHICLE HAD A START ISSUE SUCH AS A DEFECTIVE BYPASS MODULE. ULTRA TACH VALET FAULT THIS FAULT WOULD OCCUR IF THE SYSTEM WAS IN VALET AND YOU PRESSED START. RANGE FAULT THIS FAULT WOULD OCCUR IF THE USER WAS OUT OF OPERATING RANGE.
PAGE 26
90 & 95 SERIES PAGE 26 OWNER'S MANUAL SYSTEMDIAGNOSTICS PROGRAMMING - Menu 1 ALARM STATUS / DIAGNOSTICS Diagnostic Mode is a tool that can help trouble shoot a start fault. If the remote starter fails to start i.e.: the hood is open the park likes will flash a diagnostic code. i.e.: 5 flashes = start attempt with hood open. If the vehicle does not remote start, count the park light flashes then compare it to the chart below.
PAGE 27
PAGE 27 WARRANY - Menu 1 SYSTEM PROGRAMMING 90 & 95 SERIES OWNER'S MANUAL WARRANTY Applicated Security Technologies, Inc.
PAGE 28
90 & 95 SERIES PAGE 28 OWNER'S MANUAL **FOR DETAILED VEHICLE WIRING INFORMATION GO TO: http://www.ultrastarters.com/wiring_diagrams.html This site is for registered and authorized dealer only. If you are an authorized dealer but have been registered, please fill out the service request form at http://www.ultrastarters.com/wiring_diagrams.html PRODUCT INFORMATION: www.ultrastarters.com TECHNICAL SUPPORT: support@ultrastarters.com ORDERING: orders@ultrastarters.