Product data

LPC1769_68_67_66_65_64_63 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 9.5 — 24 June 2014 12 of 89
NXP Semiconductors
LPC1769/68/67/66/65/64/63
32-bit ARM Cortex-M3 microcontroller
P0[11]/RXD2/
SCL2/MAT3[1]
49 K9 J10
[1]
I/O P0[11] — General purpose digital input/output pin.
I RXD2 — Receiver input for UART2.
I/O SCL2 — I
2
C2 clock input/output (this is not an open-drain pin).
O MAT3[1] — Match output for Timer 3, channel 1.
P0[15]/TXD1/
SCK0/SCK
62 F10 H6
[1]
I/O P0[15] — General purpose digital input/output pin.
O TXD1 — Transmitter output for UART1.
I/O SCK0 — Serial clock for SSP0.
I/O SCK — Serial clock for SPI.
P0[16]/RXD1/
SSEL0/SSEL
63 F8 J5
[1]
I/O P0[16] — General purpose digital input/output pin.
I RXD1 — Receiver input for UART1.
I/O SSEL0 — Slave Select for SSP0.
I/O SSEL — Slave Select for SPI.
P0[17]/CTS1/
MISO0/MISO
61 F9 K6
[1]
I/O P0[17] — General purpose digital input/output pin.
I CTS1 — Clear to Send input for UART1.
I/O MISO0 — Master In Slave Out for SSP0.
I/O MISO — Master In Slave Out for SPI.
P0[18]/DCD1/
MOSI0/MOSI
60 F6 J6
[1]
I/O P0[18] — General purpose digital input/output pin.
I DCD1 — Data Carrier Detect input for UART1.
I/O MOSI0 — Master Out Slave In for SSP0.
I/O MOSI — Master Out Slave In for SPI.
P0[19]/DSR1/
SDA1
59 G10 K7
[1]
I/O P0[19] — General purpose digital input/output pin.
I DSR1 — Data Set Ready input for UART1.
I/O SDA1 — I
2
C1 data input/output (this is not an I
2
C-bus compliant
open-drain pin).
P0[20]/DTR1/SCL1 58 G9 J7
[1]
I/O P0[20] — General purpose digital input/output pin.
O DTR1 — Data Terminal Ready output for UART1. Can also be
configured to be an RS-485/EIA-485 output enable signal.
I/O SCL1 — I
2
C1 clock input/output (this is not an I
2
C-bus compliant
open-drain pin).
P0[21]/RI1/RD1 57 G8 H7
[1]
I/O P0[21] — General purpose digital input/output pin.
I RI1 — Ring Indicator input for UART1.
I RD1 — CAN1 receiver input. (LPC1769/68/66/65/64 only).
P0[22]/RTS1/TD1 56 H10 K8
[1]
I/O P0[22] — General purpose digital input/output pin.
O RTS1 — Request to Send output for UART1. Can also be
configured to be an RS-485/EIA-485 output enable signal.
O TD1 — CAN1 transmitter output. (LPC1769/68/66/65/64 only).
Table 5. Pin description
…continued
Symbol Pin/ball Type Description
LQFP100 TFBGA100 WLCSP100