Product data

LPC1769_68_67_66_65_64_63 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 9.5 — 24 June 2014 13 of 89
NXP Semiconductors
LPC1769/68/67/66/65/64/63
32-bit ARM Cortex-M3 microcontroller
P0[23]/AD0[0]/
I2SRX_CLK/
CAP3[0]
9E5D5
[2]
I/O P0[23] — General purpose digital input/output pin.
I AD0[0] — A/D converter 0, input 0.
I/O I2SRX_CLK — Receive Clock. It is driven by the master and
received by the slave. Corresponds to the signal SCK in the I
2
S-bus
specification. (LPC1769/68/67/66/65/63 only).
I CAP3[0] — Capture input for Timer 3, channel 0.
P0[24]/AD0[1]/
I2SRX_WS/
CAP3[1]
8D1B4
[2]
I/O P0[24] — General purpose digital input/output pin.
I AD0[1] — A/D converter 0, input 1.
I/O I2SRX_WS — Receive Word Select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I
2
S-bus
specification. (LPC1769/68/67/66/65/63 only).
I CAP3[1] — Capture input for Timer 3, channel 1.
P0[25]/AD0[2]/
I2SRX_SDA/
TXD3
7D2A3
[2]
I/O P0[25] — General purpose digital input/output pin.
I AD0[2] — A/D converter 0, input 2.
I/O I2SRX_SDA — Receive data. It is driven by the transmitter and read
by the receiver. Corresponds to the signal SD in the I
2
S-bus
specification. (LPC1769/68/67/66/65/63 only).
O TXD3 — Transmitter output for UART3.
P0[26]/AD0[3]/
AOUT/RXD3
6D3C5
[3]
I/O P0[26] — General purpose digital input/output pin.
I AD0[3] — A/D converter 0, input 3.
O AOUT — DAC output (LPC1769/68/67/66/65/63 only).
I RXD3 — Receiver input for UART3.
P0[27]/SDA0/
USB_SDA
25 J2 C8
[4]
I/O P0[27] — General purpose digital input/output pin. Output is
open-drain.
I/O SDA0 — I
2
C0 data input/output. Open-drain output (for I
2
C-bus
compliance).
I/O USB_SDA — USB port I
2
C serial data (OTG transceiver,
LPC1769/68/66/65 only).
P0[28]/SCL0/
USB_SCL
24 J1 B9
[4]
I/O P0[28] — General purpose digital input/output pin. Output is
open-drain.
I/O SCL0 — I
2
C0 clock input/output. Open-drain output (for I
2
C-bus
compliance).
I/O USB_SCL — USB port I
2
C serial clock (OTG transceiver,
LPC1769/68/66/65 only).
P0[29]/USB_D+ 29 J3 B10
[5]
I/O P0[29] — General purpose digital input/output pin.
I/O USB_D+ — USB bidirectional D+ line. (LPC1769/68/66/65/64 only).
P0[30]/USB_D 30 G4 C9
[5]
I/O P0[30] — General purpose digital input/output pin.
I/O USB_D — USB bidirectional D line. (LPC1769/68/66/65/64 only).
Table 5. Pin description
…continued
Symbol Pin/ball Type Description
LQFP100 TFBGA100 WLCSP100