Product data

LPC1769_68_67_66_65_64_63 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 9.5 — 24 June 2014 15 of 89
NXP Semiconductors
LPC1769/68/67/66/65/64/63
32-bit ARM Cortex-M3 microcontroller
P1[18]/
USB_UP_LED/
PWM1[1]/
CAP1[0]
32 H4 D9
[1]
I/O P1[18] — General purpose digital input/output pin.
O USB_UP_LED — USB GoodLink LED indicator. It is LOW when the
device is configured (non-control endpoints enabled), or when the
host is enabled and has detected a device on the bus. It is HIGH
when the device is not configured, or when host is enabled and has
not detected a device on the bus, or during global suspend. It
transitions between LOW and HIGH (flashes) when the host is
enabled and detects activity on the bus. (LPC1769/68/66/65/64
only).
O PWM1[1] — Pulse Width Modulator 1, channel 1 output.
I CAP1[0] — Capture input for Timer 1, channel 0.
P1[19]/MCOA0/
USB_PPWR
/
CAP1[1]
33 J4 C10
[1]
I/O P1[19] — General purpose digital input/output pin.
O MCOA0 — Motor control PWM channel 0, output A.
O USB_PPWR
— Port Power enable signal for USB port.
(LPC1769/68/66/65 only).
I CAP1[1] — Capture input for Timer 1, channel 1.
P1[20]/MCI0/
PWM1[2]/SCK0
34 K4 E8
[1]
I/O P1[20] — General purpose digital input/output pin.
I MCI0 — Motor control PWM channel 0, input. Also Quadrature
Encoder Interface PHA input.
O PWM1[2] — Pulse Width Modulator 1, channel 2 output.
I/O SCK0 — Serial clock for SSP0.
P1[21]/MCABORT
/
PWM1[3]/
SSEL0
35 F5 E9
[1]
I/O P1[21] — General purpose digital input/output pin.
O MCABORT
— Motor control PWM, LOW-active fast abort.
O PWM1[3] — Pulse Width Modulator 1, channel 3 output.
I/O SSEL0 — Slave Select for SSP0.
P1[22]/MCOB0/
USB_PWRD/
MAT1[0]
36 J5 D10
[1]
I/O P1[22] — General purpose digital input/output pin.
O MCOB0 — Motor control PWM channel 0, output B.
I USB_PWRD — Power Status for USB port (host power switch,
LPC1769/68/66/65 only).
O MAT1[0] — Match output for Timer 1, channel 0.
P1[23]/MCI1/
PWM1[4]/MISO0
37 K5 E7
[1]
I/O P1[23] — General purpose digital input/output pin.
I MCI1 — Motor control PWM channel 1, input. Also Quadrature
Encoder Interface PHB input.
O PWM1[4] — Pulse Width Modulator 1, channel 4 output.
I/O MISO0 — Master In Slave Out for SSP0.
P1[24]/MCI2/
PWM1[5]/MOSI0
38 H5 F8
[1]
I/O P1[24] — General purpose digital input/output pin.
I MCI2 — Motor control PWM channel 2, input. Also Quadrature
Encoder Interface INDEX input.
O PWM1[5] — Pulse Width Modulator 1, channel 5 output.
I/O MOSI0 — Master Out Slave in for SSP0.
Table 5. Pin description
…continued
Symbol Pin/ball Type Description
LQFP100 TFBGA100 WLCSP100