Product data

LPC1769_68_67_66_65_64_63 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 9.5 — 24 June 2014 16 of 89
NXP Semiconductors
LPC1769/68/67/66/65/64/63
32-bit ARM Cortex-M3 microcontroller
P1[25]/MCOA1/
MAT1[1]
39 G5 F9
[1]
I/O P1[25] — General purpose digital input/output pin.
O MCOA1 — Motor control PWM channel 1, output A.
O MAT1[1] — Match output for Timer 1, channel 1.
P1[26]/MCOB1/
PWM1[6]/CAP0[0]
40 K6 E10
[1]
I/O P1[26] — General purpose digital input/output pin.
O MCOB1 — Motor control PWM channel 1, output B.
O PWM1[6] — Pulse Width Modulator 1, channel 6 output.
I CAP0[0] — Capture input for Timer 0, channel 0.
P1[27]/CLKOUT
/USB_OVRCR
/
CAP0[1]
43 K7 G9
[1]
I/O P1[27] — General purpose digital input/output pin.
O CLKOUT — Clock output pin.
I USB_OVRCR
— USB port Over-Current status. (LPC1769/68/66/65
only).
I CAP0[1] — Capture input for Timer 0, channel 1.
P1[28]/MCOA2/
PCAP1[0]/
MAT0[0]
44 J7 G10
[1]
I/O P1[28] — General purpose digital input/output pin.
O MCOA2 — Motor control PWM channel 2, output A.
I PCAP1[0] — Capture input for PWM1, channel 0.
O MAT0[0] — Match output for Timer 0, channel 0.
P1[29]/MCOB2/
PCAP1[1]/
MAT0[1]
45 G6 G8
[1]
I/O P1[29] — General purpose digital input/output pin.
O MCOB2 — Motor control PWM channel 2, output B.
I PCAP1[1] — Capture input for PWM1, channel 1.
O MAT0[1] — Match output for Timer 0, channel 1.
P1[30]/V
BUS
/
AD0[4]
21 H1 B8
[2]
I/O P1[30] — General purpose digital input/output pin.
I V
BUS
— Monitors the presence of USB bus power.
(LPC1769/68/66/65/64 only).
Note: This signal must be HIGH for USB reset to occur.
I AD0[4] — A/D converter 0, input 4.
P1[31]/SCK1/
AD0[5]
20 F4 C7
[2]
I/O P1[31] — General purpose digital input/output pin.
I/O SCK1 — Serial Clock for SSP1.
I AD0[5] — A/D converter 0, input 5.
P2[0] to P2[31] I/O Port 2: Port 2 is a 32-bit I/O port with individual direction controls for
each bit. The operation of port 2 pins depends upon the pin function
selected via the pin connect block. Pins 14 through 31 of this port
are not available.
P2[0]/PWM1[1]/
TXD1
75 B9 K1
[1]
I/O P2[0] — General purpose digital input/output pin.
O PWM1[1] — Pulse Width Modulator 1, channel 1 output.
O TXD1 — Transmitter output for UART1.
P2[1]/PWM1[2]/
RXD1
74 B10 J2
[1]
I/O P2[1] — General purpose digital input/output pin.
O PWM1[2] — Pulse Width Modulator 1, channel 2 output.
I RXD1 — Receiver input for UART1.
Table 5. Pin description
…continued
Symbol Pin/ball Type Description
LQFP100 TFBGA100 WLCSP100