User manual

Digital Projection Titan Pro Series 3 SIGNAL INPUTS AND OUTPUTS Connection Guide

25Rev F July 2014

Side connection panel on 3D projectors

DVI (input 9)

Single or Dual Link DVI-D input.

This input has a DVI-I connector, but can only receive digital (DVI-D) signal from a

compatible source.

Sources up to:

• 1920x1080 resolution for 1080p models

• 1920x1200 resolution for WUXGA models

24-160Hz; up to 12 bits per color. Supports HDCP.

DVI/HDMI (input 10)

Single Link DVI-D (HDMI 1.4 compatible ) input.

Sources up to:

• 1920x1080 resolution for 1080p models

• 1920x1200 resolution for WUXGA models

24-160Hz; up to 12 bits per color.

Twin-Link DVI-D (Dual Pipe)

Connect both sockets. Input 9 (DVI) is the Main input, Input 10

(DVI/HDMI) is the Sub input.

Sources up to:

• 1920x1080 resolution for 1080p models

• 1920x1200 resolution for WUXGA models

at frame rates consistent with up to 148.5 Megapixel/sec/pipe (including blanking)

Notes

For a complete listing of pin

congurations for all signal and

control connectors, see Appendix

E: Wiring Details the Reference

Guide.

See Differences between Inputs

9-11 and Inputs 1-8 further in

this section for more information

about input connections and

the differences between the two

connection panels.

For information about 3D video,

see 3D connections further in this

guide.

Side Connection Panel