Datasheet
Table Of Contents
- 1. General Description
- 2. Electrical Characteristics
- 3. SX1272/73 Features
- 4. SX1272/73 Digital Electronics
- 4.1. The LoRaTM Modem
- 4.2. FSK/OOK Modem
- 4.2.1. Bit Rate Setting
- 4.2.2. FSK/OOK Transmission
- 4.2.3. FSK/OOK Reception
- 4.2.4. Operating Modes in FSK/OOK Mode
- 4.2.5. General Overview
- 4.2.6. Startup Times
- 4.2.7. Receiver Startup Options
- 4.2.8. Receiver Restart Methods
- 4.2.9. Top Level Sequencer
- 4.2.10. Data Processing in FSK/OOK Mode
- 4.2.11. FIFO
- 4.2.12. Digital IO Pins Mapping
- 4.2.13. Continuous Mode
- 4.2.14. Packet Mode
- 4.2.15. io-homecontrol® Compatibility Mode
- 4.3. SPI Interface
- 5. SX1272/73 Analog & RF Frontend Electronics
- 6. Description of the Registers
- 7. Application Information
- 8. Packaging Information
- 9. Revision History

www.semtech.comPage 110
SX1272/73
WIRELESS, SENSING & TIMING DATASHEET
Rev. 2 - July 2014
©2014 Semtech Corporation
RegIrqFlags
(0x12)
7 RxTimeout rc 0x00
Timeout interrupt: writing a 1 clears the IRQ
6 RxDone rc 0x00
Packet reception complete interrupt: writing a 1 clears the IRQ
5 PayloadCrcError rc 0x00
Payload CRC error interrupt: writing a 1 clears the IRQ
4 ValidHeader rc 0x00
Valid header received in Rx: writing a 1 clears the IRQ
3 TxDone rc 0x00
FIFO Payload transmission complete interrupt: writing a 1 clears
the IRQ
2 CadDone rc 0x00
CAD complete: write to clear: writing a 1 clears the IRQ
1 FhssChangeChannel rc 0x00
FHSS change channel interrupt: writing a 1 clears the IRQ
0 CadDetected rc 0x00
Valid Lora signal detected during CAD operation: writing a 1
clears the IRQ
RegRxNbBytes
(0x13)
7-0 FifoRxBytesNb r n/a Number of payload bytes of latest packet received
RegRxHeaderCnt
ValueMsb
(0x14)
7-0
ValidHeaderCntMsb(15:
8)
rn/a
Number of valid headers received since last transition into Rx
mode, MSB(15:8). Header and packet counters are reseted in
Sleep mode.
RegRxHeaderCnt
ValueLsb
(0x15)
7-0 ValidHeaderCntLsb(7:0) r n/a
Number of valid headers received since last transition into Rx
mode, LSB(7:0). Header and packet counters are reseted in
Sleep mode.
RegRxPacketCntV
alueMsb
(0x16)
7-0
ValidPacketCntMsb(15:
8)
rc n/a
Number of valid packets received since last transition into Rx
mode, MSB(15:8). Header and packet counters are reseted in
Sleep mode.
RegRxPacketCntV
alueLsb
(0x17)
7-0 ValidPacketCntLsb(7:0) r n/a
Number of valid packets received since last transition into Rx
mode, LSB(7:0). Header and packet counters are reseted in
Sleep mode.
RegModemStat
(0x18)
7-5 RxCodingRate r n/a Coding rate of last header received
4
ModemStatus
r ‘1’ Modem clear
3 r ‘0’ Header info valid
2 r ‘0’ RX on-going
1 r ‘0’ Signal synchronized
0 r ‘0’ Signal detected
RegPktSnrValue
(0x19)
7-0
PacketSnr
rn/a
Estimation of SNR on last packet received.In two’s compliment
format mutiplied by 4.
Name
(Address)
Bits
Variable Name
Mode Reset
LoRa
TM
Description
SNR dB[]
PacketSnr twos complement[]
4
-----------------------------------------------------------------------------------=