Instruction manual

Step 12a. With the piece of covering still folded, use a hobby

knife with a sharp #11 blade and a straight edge to carefully cut

the entire length of the covering at the marks you made in the

previous step.

Step 13a. Remove the backing from the covering. Place the

folded crease into the center of the hinge line on the bottom of

the wing. Using a straight edge, hold one side of the covering in

place while ironing down the opposite side with a sealing iron.

Step 14a. Fully deflect the aileron and/or flap in the up posi-

tion. Place the straight edge over the hinge line covering that

you just ironed down. With the straight edge placed firmly at the

bottom of the hinge line, iron down the covering while making

sure the aileron and/or flap are fully deflected.

Section 1a: Assembling the Wing

CONTINUED