Product Manual

Page 4 of 11
Intended Use
The Ultra-Tow XTP Auto-Locking Adjustable Slide Mount is designed to adapt to a 2 1/2” trailer hitch
receiver tube to multi-height pintle hook applications. The adaptor can handle over-the-road towing
within stated capacities. For off-road applications, reduce the capacities listed below by 25% and use
in conjunction with a swivel type device.
Technical Specifications
Property
Specification
Max. Gross Trailer Weight
15 ton (30,000 lbs.)
Max. Vertical Load
3 ton (6,000 lbs.)
Product Weight
28.3 lbs.
Total Length
14.9 in.
Material
Steel
Fits Receivers
2 ½ in.
Important Safety Information
⚠WARNING
 Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
 The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this slide mount.
Always be aware of the environment and ensure that the tool is used in a safe and responsible
manner.
 Do not allow persons to operate or assemble the slide mount until they have read this manual and
have developed a thorough understanding of how it works.
 Do not modify this slide mount in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the product. There are specific applications for which the
product was designed.
 Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. This
product will be safer and do a better job at the capacity for which it was intended. DO NOT use
this equipment for a purpose for which it was not intended.
 Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
 This product may contain chemicals known to the State of California to cause cancer, birth
defects, or other reproductive harm.
⚠WARNING
WORK AREA SAFETY