Product Manual

Page 10 of 16
 To lift the crane, use the jack handle (15) to lock the jack valve, then put the handle into the
fulcrum and lift the jack.
 To lower the crane, use the jack handle (15) to release the jack valve.
Note: The crane can swivel 360°. Insert the stop pin (#18) into the hole. The crane can only swivel
180° due to the two stops (#19, #20).
After Each Use
 Before driving the vehicle, retract the winch cable completely, position the boom over the truck’s
wheel well, and insert the post pin to prevent the boom from swiveling.
 Fold the boom and tie it with the strap.
 Disconnect the T-shape connector with the truck and move it to the innermost area of the base
rod. Use one pin (#32 or #33) to fix its position on the rod.