RECEIVER-MOUNTED MOTORCYCLE CARRIER OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. Northern Tool + Equipment cannot be responsible for issues arising from modification.
• Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work area, particularly those hazards below the work surface hidden from the operator’s view that may be unintentionally contacted and may cause personal harm or property damage. PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when using a Motorcycle Carrier. Do not use a Motorcycle Carrier while you are tired or under the influence of drugs, alcohol or medication.
ASSEMBLY 1. Align the two Platforms (1) and connect by two Joint Brackets (28), using four Bolts (24) and Lock Nuts (25) on each Joint Bracket (28) to secure two Platform (1). 2. Attach the two Arc Bars (26) to both sides of the Platform (1), using two Bolts (24) and Lock Nuts (25) on two end of each Arc Bar (26) to secure it on the Platform (1). 3. Screw the two Bolts (27) into the bushing on the Joint Bracket (28) and tighten fully. REFER TO ABOVE PHOTO FOR STEPS 1, 2 and 3 4.
OPERATION WARNING: Read ENTIRE IMPORTANT SAFETY INFORMATION section at beginning of this manual including all text under subheadings therein before set up or use of this product. Loading Motorcycle 1. Remove LEFT Wheel Lock Pin (8), Adjustment Pin (16) and their R-pins (6). 2. Move Adjustment Pin (16) so that motorcycle’s weight will be centered on Platform. Some larger wheels will require Adjustment Pin to be left off completely. If used, secure Adjustment Pin in place with an R-pin (6). 3.
Unloading Motorcycle WARNING: Keep away from motorcycle parts that may suddenly move as tension is released. 1. Remove Wing nut (10), Press Plate (9) and Ramp (2). 2. Hook Ramp (2) to lip on LEFT side of platform. The Ramp must be properly secured to Platform. 3. Release motorcycle’s front wheel from Wheel Clamps (23). 4. Have an assistant support motorcycle while carefully releasing tension on all tie-downs. 5. Remove both Wheel Lock Pins (8) and their R-pins (6). 6. Set motorcycle into Neutral gear.
DIAGRAM & PARTS LIST Part# Description Qty. Part# Description Qty. For replacement parts and technical questions, please call 1-800-222-5381. Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Description Platform Ramp 2in. Tube w/ Bracket Tie Down Bracket Hitch Pin 5/8in.
WARRANTY One-year limited warranty Distributed by Northern Tool + Equipment Co., Inc.
