Motorcycle Wheel Chock Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This wheel chock is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ironton Motorcycle Wheel Chock is designed for use in a truck bed, motorcycle trailer, or other flat surface. The location should have room to hold the chock and motorcycle with room remaining to maneuver the motorcycle. Built for light duty motorcycles! Fit for motorcycle tires up to 6’5”. Packaging Contents Frame (3) Bolt (2) Spring Washer (2) Nut(2) Technical Specifications Item Material Weight Max Tire Width Description Carbon Steel 3.8 lb.
Important Safety Information ⚠WARNING Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner.
⚠CAUTION WHEEL CHOCK USE AND CARE Do not force the wheel chock. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job. Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part. Store the wheel chock when it is not in use.
3. Remove the chock. Check both sides of the surface to ensure a safe drilling area. Drill appropriately sized holes for the mounting hardware. 4. Replace the chock and insert mounting hardware. Washers should be used at each end of the bolt and the chock should be firmly tightened. Noted: If securing to concrete, use concrete anchors and concrete drill bits. Before Each Use ⚠WARNING TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment.
Maintenance Interval Daily before operating After the first 20 operating hours Maintenance Point Check for loose screws, misalignment or binding of moving parts, cracked, or broken parts. Check for loose screws, misalignment or binding of moving parts, cracked, or broken parts. Check for any distortion. After the first 50 operating hours or every week Check for loose screws, misalignment or binding of moving parts, cracked, or broken parts. Check for any distortion.
Parts List Reference 1 2 3 4 5 Part Number 1 2. 3 4 5 Part Description U Connection Frame M6 x 49 bolt Base Frame Spring Washer M6 Nut Quantity 1 2 2 2 2 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or ''Us'') warrants to the original purchaser only (''You'' or ''Your'') that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 90 days from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.