72 WATT LED WORKLIGHT OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ultra-Tow product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This worklight is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY CONSIDERATIONS • If mounting this product requires drilling holes, the installer MUST be sure that no vehicle components or other vital parts could be damaged by the drilling process.
2. Adjust the light body (1) to a desired angle, then insert the M3 x 17 Hex socket cap screw （3）to hole on the bracket(4) and tighten it. (See Figure 2) Figure 2 3. Run the M6 x 35 Hex socket cap screw（5） from the bracket (4), Rubber mat（6）, Mounting surface, then attach the M6 hex nut（7）.
WIRING DIAGRAM NOTE: DIAGRAM SHOWN WITH OPTIONAL WIRING KIT (ITEM# 31436, SOLD SEPARATELY) · Put the red wire of 72W LED Work Light to positive electrode of Wire Harness, and put the black wire of 72W LED Work Light to negative pole of Wire Harness. If you are not using the optional wiring kit, we recommend using 18-ga. wire.
PARTS DIAGRAM & PARTS LIST Mounting Surface Part# Description Qty. 1 Lamp Body 1 2 M6 x 25 Hex socket cap screw 2 3 M3 x 17 Hex socket cap screw 2 4 Bracket 2 5 M6 x 35 Hex socket cap screw 2 6 Rubber mat 2 7 M6 Hex nut 2 8 O-ring 2 For replacement parts and technical questions please call 1-800-222-5381.
Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306 NorthernTool.
