Motorcycle Rear Wheel Lift Stand Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ultra-Tow™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This lift stand is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The Ultra-Tow Motorcycle Rear Wheel Lift Stand prevents flat spots on the rear tires during storage. It adjusts to fit different wheels and lifts and stabilizes any dual arm sports bike quickly and easily. Packaging Contents Support Arms with Wheels (2) Front Handle (1) Swingarm L Support (2) Plastic Headed Bolt (2) Washers (4) Nuts (4) Bolts (4) Technical Specifications Property Adjust to Fit Bikes with Rear Spools Construction Product Weight Specification 12-16.
may put you dangerously close to cutting tools and rotating parts. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury. Dress properly.
Do not sit on the motorcycle when it is loaded in the wheel chock. Main Parts of Product Reference 1 2 3 4 5 6 7 8 Subassembly Support Arm Support Arm Front Handle Swingarm L Support Plastic Headed Bolt Washer Nut Bolt Assembly Instructions ⚠WARNING The chock must be mounted to a solid surface capable of bearing heavy equipment. The location should have room to hold the chock and motorcycle with room remaining to maneuver the motorcycle.
Step 1. Align the front handle (3) with the support arms (1 & 2) and slide into place. Step 2. Secure the front handles (3) to the support arms (1 & 2) using 2 bolts (8), 2 washers (6), and 2 nuts (7) on each side.
Step 3. Insert the desired motorcycle swingarm L support (4) and adjust width to the motorcycle swingarms. Step 4. Tighten the plastic headed bolt (5) on each side to hold the swingarm L support (4) in place. Before Each Use ⚠WARNING Ensure that there is nothing attached to the front forks or the fairing of the motorcycle that will catch on the chock. Also ensure that the floor/ground is level and strong enough (preferably concrete) to take the weight of the chock and the motorcycle.
Mount the wheel chock to a hard, level surface that is capable of holding the weight of the motorcycle. Do not sit on the motorcycle when it is loaded in the wheel chock. 1. Ascertain the width of the motorcycle's rear swingarms in order to set the swingarm pads of the stand to the correct width. Unscrew the knobs and adjust the swingarms to the correct width equally both sides, and lock in place. 2.
After the first 50 operating hours or every week Check for loose screws, misalignment or binding of moving parts, cracked, or broken parts. Check for any distortion.
5 6 7 8 9 10 11 Support Arm Wheel Axle 2.5” Wheel Big Washer Cotter Pin Plastic Headed Bolt Swingarm L Support 2 2 4 4 4 2 2 Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Ultra-Tow product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
