Product Manual

Page 6 of 14
 Always be sure cable or strap is strong enough to support the load to be lifted.
 Always inspect cable and attachment hook before each use to insure they are not damaged.
 Replace cable if worn, frayed or kinked. If cable or hook breaks, the cable can act like a whip and
inflict serious injury to anyone in the path of its movement.
 Do not force your winch. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
 Store idle tools. Store your winch when it is not in use. Store it in a dry, secure place out of the
reach of children. Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for your model. Accessories that
may be suitable for one product may create a risk of injury when used with another tool. Never use
an accessory that has a lower operating speed or operating pressure than the tool itself.
 Always be sure cable or strap is pulling straight off winch - not at an angle. This will prevent cable
or strap from rubbing against winch drum, avoiding cable or strap damage.
Specific Operation Warnings
⚠WARNING
 Do not exceed the rated load capacity. Be aware of dynamic loading! Sudden load movement
may briefly create excess load causing product failure.
 Do not use for overhead lifting.
 Do not lengthen the handle for additional leverage.
 Keep hands clear from the gear, drum and rolling cable. Always wear gloves when using the
winch.
 Never leave winch unattended while supporting a load.
 Follow all instructions when replacing the cable of strapping.
 Always maintain a minimum of four (4) full turns of cable or strap around the drum of the winch.
Never apply load to winch fully extended.
 Operate winch manually only.
 After moving the item, be sure to secure it. The winch is intended for short term use only.
 Do not use to transport people of animals.
 Not for use by or around children.
Winch Mounting and Cable Attachment
⚠WARNING
 Inspect before every use. Do not use if damaged or parts loose. Examine the winch for structural
cracks, bends, damage, frayed or kinked cable, and any other conditions that may affect the safe
operation of the winch.
 Do not use the winch even if minor damage appears. Keep cable straight to avoid kinking it. A
kink permanently weakens the cable, even after it is straightened out. Kinked cable can fail
suddenly and must not be used.