Bra ake Winch– W –1600 0 Lb. Capac C city Owner’s Ma anual WA ARNING: Read R carefully and underrstand all ASSEMBLY AN ND OPERAT TION INSTRUC CTIONS beffore operating. Failure to follow the sa afety rules an nd other bassic safety pre ecautions may resu ult in serious personal injury.
Thank you very much for choosing anUltra-Tow™product! For future reference, please complete the owner’s record below: Serial Number/LotDate Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This winch is designed for certain applications only.
Table of Contents Intended Use ..........................................................................................................................................4 Technical Specifications ......................................................................................................................4 Important Safety Information ...............................................................................................................4 Specific Operation Warnings ..........................
Intended Use This Ultra-Tow Brake Winch is designed for safer, easier boat loading and unloading.Winches are not to be used as hoists for lifting, supporting, or transporting people or for loads over areas where people can be present. Brake Winches are suitable for many lifting and lowering applications. Self-locking brake winches provide additional safety and control for many lifting and pulling jobs. The automatic friction brake supplies constant, positive holding action and prevents a runaway load.
⚠WARNING WORK AREA SAFETY Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury. Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the winch. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the winch.
not use for overhead liftin ng. Do n Do n not lengthen the handle for f additionall leverage. when using the Keep hands clea ar from the gear, drum an nd rolling cab ble. Always wear w gloves w wincch. Nevver leave winch unattende ed while sup pporting a loa ad. Follo ow all instrucctions when replacing the e cable of strrapping. Alwa ays maintain n a minimum of four (4) fu ull turns of ca able or strap around the ddrum of the winch. w Nevver apply load d to winch fully extended .
5) Insta all the cable under the ca able clamp. 6) Tigh hten the nut securely. s 7) Put pawl in reel in position, then reel the new cable onto o drum by turning the h andle clock kwise, bein ng careful not to allow kin nking. 8) Testt winch for proper operation. Main P Parts of Winch Assem mblyInstru uctions Insert ha andle and se ecure with loc ck nut.
Check the safety devices and the safe condition of the product. Check for visible defects. Check that all parts of the product are firmly attached. Check that the safety devices are in working order. Operating Instructions ⚠WARNING The handle and nut must be tightened against the drive shaft before operating the winch. The wire rope must be properly wrapped on the drum to be able to support a load without damaging the wire rope.
Keep winch in good working order. Damaged or severely-worn parts create unnecessary dangers and could result in personal injury or property damage. Always lock up product and keep out of children. Maintain the winch by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your tool in good repair.
Parrts Diagrram P Parts Lis st No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Item Description D Nut M16 Screw Twine Drum m Cover Mounted Base Snap Ring Ratchet Cla aw Retaining Ring R for Axle 12 Shaft Ratchet Friction Fla ake Clip B Shaft Cover Part Washer 6 Quan ntity No.
Replacement Parts For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence. When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ultra-Tow product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one yearfrom date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
D Distributed by y: orthern Tool & Equipmentt Company, Inc. No Burnsvillle, Minnesotta 55306 www w.northerntoo ol.
