Product Manual

Page 5 of 13
 Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well-lit.
Cluttered, wet, or dark work areas can result in injury. Using the winch in confined work areas
may put you dangerously close to other cutting tools and rotating parts.
 Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the winch.
⚠CAUTION
WINCH USE AND CARE
 Do not force the winch. Products are safer and do a better job when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.
 Check for damaged parts before each use. Carefully check that the winch will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
winch with a damaged part.
 Store the winch when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
 Use only accessories that are recommended by the manufacturer for use with your winch.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
⚠WARNING
PERSONAL SAFETY
 Stay alert, watch what you are doing, and use common sense when operating the winch. Do not
use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating the tool may result in serious personal injury.
 Do not overreach. Keep proper footing and balance at all times.
Specific Operation Warnings
⚠WARNING
 Do not exceed the rated load capacity. Be aware of dynamic loading! Sudden load movement
may briefly create excess load causing product failure.
 Do not use for overhead lifting.
 Do not lengthen the handle for additional leverage.
 Keep hands clear from the gear, drum and rolling cable. Always wear gloves when using the
winch.
 Never leave winch unattended while supporting a load.
 Follow all instructions when replacing the cable of strapping.
 Always maintain a minimum of four (4) full turns of cable or strap around the drum of the winch.
Never apply load to winch fully extended.
 Operate winch manually only.
 After moving the item, be sure to secure it. The winch is intended for short term use only.