Installation Instructions

4’ ULTRADECK POST KIT
Rustic™
Installation:
Post kits cover, protect,
and beautify 4x4 posts
Matching Rail & Stair
Rail Kits also available.
DIMENSIONS:
4.25” x 4.25” x 48”
Kit Includes:
112-0972 Rustic Gray
112-0979 Rustic Cedar
112-0985 Rustic Hickory
112-0993 Rustic Redwood
1 Post Sleeve designed for
use over 4x4 treated
post - Not included.
1 Ring Base
1 Post Cap
Safety Glasses
Tape Measure
Chop Saw
Square
Level
Recommended
Tools:
1
Cut post sleeve to proper
length. For installation of post
caps, the post sleeve must be
1” taller than the 4x4
treated post.
2
Ensure that 4x4 treated post is
plumb and level.
3
Slide post sleeve over the 4x4
treated post. Be sure and slide
the ring base to the bottom
before installing the rail
section. Post sleeves are
fastened when spindles are
secured to posts.
4
Attach post cap after rail is
installed. A silicone adhesive
may be used to secure the
post cap.
Instructions continued on
back of page.

Summary of content (2 pages)