Installation Instructions

Railing Installation:
Your installation guide for Pinnacle
Pinnacle Railing System:
!
Make sure the post sleeve and ring base have been installed. Make sure the post is plumb
and level. Properly size the upper and lower rail and the top cap by measuring the distance
between the two post sleeves, and cut to desired length. Make sure the spindles are all the
same length, measure and cut accordingly.
Post Cap (2)
Post Sleeve(2)
Ring Base (2)Support Block(1)
Check with local building code
Upper Handrail (1)
Lower Railing (1)
3-1/2"
Premium
Deck Screw
Spindles
Traditional 6’ section: ~ 15
Check with local building code
16
Top Cap
Rail (Top Position)
Spindle
Rail (Bottom Position)
Support Block
Vertical
Surface of
Rails Face
Outward
Rail Section:
i
Note: It is very important to verify spindles are all the same length. Measure and cut
accordingly.
To apply this method as a stair rail assembly, please see preparation instructions, page 9.
Pinnacle Brackets
Pinnacle Bracket
Pinnacle rail uses brackets for installation and doesn't need post spindles on the outside
edges of railings. Vertical wall of rails will allow for multiple spindle styles.
Upper Handrail