Installation Instructions

INSTALLATION INSTRUCTIONS

UltraDeck® Premium Composite Straight Rail

Customer Service #: 800.273.8909

A. Top Rail

B. Bottom Rail

C. Brackets

D. Aluminum Round Balusters

E. Support Block

F. Post Sleeve Cap*

G. Post Sleeve Ring*

H. Post Sleeve**

I. Decking

J. Fascia

K. Code-approved Wood Joist

L. Code-approved Wood Rim Joist

* Included with post sleeve kit (sold separately)

Wood post and carriage bolts not included in the railing kits.

** 4” x 4" post sleeve (Actual size 4.45" x 4.45”x 48") is designed to fit over

4" x 4" pressure-treated post or Structural Steel Support post (1122001)

DETERMINING BALUSTERS NEEDED

Baluster Type

Per 68.35” Section

Straight Rail Application

Stair Rail Application

PAGE 1
INSTALLATION INSTRUCTIONS UltraDeck® Premium Composite Straight Rail Customer Service #: 800.273.8909 A. B. C. D. E. F. G. H. I. J. K. L. Top Rail Bottom Rail Brackets Aluminum Round Balusters Support Block Post Sleeve Cap* Post Sleeve Ring* Post Sleeve** Decking Fascia Code-approved Wood Joist Code-approved Wood Rim Joist DETERMINING BALUSTERS NEEDED Baluster Type Per 68.
PAGE 2
HOW TO INSTALL STRAIGHT DECK RAILING Read rail instructions BEFORE installation. NOTE: Always consult local building codes for approved post installation. Important: When using 48" post sleeves, measure carefully to allow for clearance of both rail attachment as well as clearance for post cap attachment, and trim these before installing over pressure treated posts. For 36" railing height, post sleeve should be cut at minimum of 40".