Installation Instructions

Table of Contents:

2 Job Site Storage

3 Hardware and Accessories

5 Color Options and Fading

7 General Guidelines for Installation

12 QuickCap

™

Installation

14 Cladding & Endcap Installation

15 Cleaning and Care

16 Warranty

JOB SITE STORAGE:

If you should have any questions, please email UltraDeckHelp@MidwestManufacturing.com before starting your project.

• UltraDeck

must be stored flat and level. Adjust support blocks accordingly.

• When Stacking UltraDeck

products, supports should start at each end and be spaced 2' on center. Supports should line up

vertically.

• DO NOT stack UltraDeck

products higher than 6 bundles or 12' high.

• COVER MATERIALS ON SITE UNTIL READY FOR INSTALLAION

CORRECT STACKING

INCORRECT STACKING

Support Blocks