Datasheet
Intended use
The Stereo IR 170 Evaluation Kit is intended for exploration and development purposes only and is not suitable
for incorporation into a product for sale or distribution. For the purpose of the Ultraleap and Leap Motion SDK
agreement, the Stereo IR 170 does not constitute a “Leap Motion-authorized embedded optical module”.
This kit has been designed for the purpose of enabling the evaluation of Ultraleap hand tracking by professionals at
research, design, or development facilities. We recommend to download the latest version of the SDK to optimise
the performance of your device. This version of hardware is not tested or certified compliant to CE requirements
or equivalent international standards. To protect the evaluation kit please ensure it is always handled with care
and is stored appropriately with lens caps attached when not in use. Should the lenses require cleaning, we
recommend gentle cleaning using >99% isopropyl alcohol (IPA) and a soft lint free cloth.
For intended performance, it is important that your Stereo IR 170 Evaluation Kit remains flat. Minimise flexing while
mounting the device. Use a sti, flat, mounting surface or for curved surfaces an alternative solution that provides
minimal flexing.
CAUTION! Removing the PCB from the plastic housing will invalidate your warranty. In particular, the USB header
(the connection from the USB port to the PCB) is rated for 10 connections only. Removing the PCB from the
plastic housing multiple times may cause the USB connection to stop working. If the PCB is outside the plastic
housing, it is vulnerable to electrostatic discharge and calibration may also be aected, negatively impacting
tracking performance. If you wish to remove the PCB from the plastic housing for evaluation purposes please
contact Ultraleap for support.
Evaluation use only
The Stereo IR 170 Evaluation Kit is provided for technical evaluation purposes only. Commercial or enterprise use is
subject to license agreement. Resale without agreement from Ultraleap is prohibited. Get in touch with us at
www.ultraleap.com/contact.
Power supply: 5V DC via USB connector (minimum 0.5A).
Data connection:
Micro USB Type-B (2.0 or 3.0) when in plastic housing.
When integrated, PCB module can be wired directly.
Interaction zone:
Depth of between 10 cm (4”) to 75cm (29.5”) preferred, up to 1 m (39”) maximum;
170×170° typical field of view (160×160° minimum). Tracking works in a range of
environmental conditions.
Cameras: Stereo IR operating at 90fps
Operating
wavelength:
850nm. Stereo IR 170 provides its own illumination via two IR LEDs spaced
on either side of the cameras.
Ambient operating
temperature:
0° to 40°C (32° to 104° F) N.B. Out of case operating temperature range is slightly wider,
0° to 50°C (32º to 122° F).
Minimum system
requirements:
Windows
®
7+; AMD Phenom™ II or Intel
®
Core™ i3/i5/i7 processor; 2 GB RAM; USB 2.0
port. VR headsets may come with their own system requirements.
Note: The Stereo IR 170 Evaluation Kit is currently Windows compatible only
Software:
Downloadable from https://www.developer.ultraleap.com
Specifications
Ultraleap reserves the right to update or modify this specification without notice.