Installation Guide

1. Pull
- 13 -
3.2 Lock From Outside
Press Ultraloq Button to lock manually.
Enable Auto Lock feature and the lock will relock automatically.
3.3 Unlock From Inside
Rotate the knob to a vertical position to unlock.
3.4 Reset the Lock
Please note all data will be erased if you reset U-Bolt Pro to
factory default. If you are using U-tec App as Owner, please click
“Delete and Reset” to remove the lock from your U-tec Account,
then use a Reset Needle to push the Reset Button (at the bottom
of Interior Assembly) for around 3 seconds until you hear one
long beep and two short beeps.
3.5 Replace Batteries
Please use 4 high-quality alkaline AA batteries for replacement
when the battery is dead.
3.6 5V Emergency Power
Micro USB interface is used to connect regular 5V power bank to
activate the lock in case the battery is dead.
3.7 Emergency Key Override
Emergency Key Override can be used when the battery is dead.
Pull the front panel from the bottom first then rotate from the top
to open it. You can see Backup Key Hole inside. Insert the key and
rotate to unlock, just like any lock.
3.8 Enable Or Disable Auto Lock
Enable
Please keep Bolt unlocked and press "1" button for 3 seconds
until LED turns green and "1" button blinks.
Important Note
Please keep at least one key in secure location outside of
your place.
2. Rotate 3. Insert