Ultraloq UL3 Fingerprint and Touchscreen Smart Lock User Guide Welcome ( V1.
Operation Video Please watch our easy step by step operation video before attempting to use your Ultraloq UL3 Fingerprint and Touchscreen Smart Lock. www.u-tec.com/support If you have questions regarding the installation process please contact us at customerservice@u-tec.com Register Your Lock To ensure the best warranty coverage and customer service, please register your product at http://store.u-tec.
Lock Parts Exterior Touchscreen Fingerprint reader Message display screen Backup key hole Restart button Backup Key Hole: Used to insert the key to unlock. Restart Button: Used to jump start the lock if activation fails. Fingerprint Reader: Used to press finger and unlock from the outside. Touchscreen: Used to enter the code and unlock from outside. Return to previous Confirm 0 - 9 Numbers Interior SN Label Reset Button Battery Cover Reset Button: Used to reset the lock to factory default settings.
Lock Operation Clean the fingerprint reader and touchscreen Use a microfiber cloth and wipe across the fingerprint reader surface and the touch screen. Lock Activation Press finger on fingerprint reader or touch lock with the back of hand or fingers. The lock will turn off again after 20 seconds if there are no other inputs. Open door from outside with user PIN code 1. Touch lock with back of hand or fingers to activate the lock. 2. Input user PIN code to unlock. 3. Rotate handle and open the door.
Open door from outside with fingerprint 1. Press finger on the fingerprint reader to activate and unlock. 2. Rotate the handle and open the door. Open door from inside 1. Rotate the handle and open the door. Replace battery When you activate the lock and see the message “Low battery”, you should replace the batteries. Use 3 high-quality alkaline AA batteries for replacement. Emergency Key Override Emergency Key Override can be used when the battery is dead, or when no valid User Code is known.
Vague Code Ultraloq UL3 supports up to 16-digit Vague Code. Just enter any 16-digit code, as long as a correct code is included in what you entered, you can open the door. Example User Code:123456 Vague Code Method 1: 1 2 3 4 5 6 X X X X X X 2: X X X X X X 1 2 3 4 5 6 3: X X X 1 2 3 4 5 6 X X X Place Finger 1. Place a finger flat on the sensor’s surface. 2. Place a finger in the center of the sensor.
Lock Programming Factory Defaults Factory default setting is that any fingerprint or PIN code can open the door. Register Admin and User Admin account must be created first before any other programming.Then use the Admin account to add or delete the other accounts. User PIN code User PIN code can be 4 to 8 numbers. User ID number User ID can be 1 to 8 numbers. Limit the number of users on lock You can register up to 95 users with fingerprint and PIN code. Basic programming steps 1. Activate lock.
1 Add Admin First Admin account must be created first prior to any other programming.
2 Add User Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 1 Welcome Admin code Menu Add user Press Enter user ID Enter user ID Finger or code Press finger or input a PIN code Enter again Press finger or input a PIN code Success -8-
3 Delete User Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 2 Press Enter user ID Enter user ID again -9- Welcome Admin code Menu Delete user Enter user ID Enter again Success
4 Add Admin Activate Lock Press and hold for 3 sec Welcome Admin code Menu Press admin finger or enter admin PIN code Press 7 Press Add admin Finger or code Press finger or input a PIN code Enter again Press finger or input a PIN code Success Note: It is recommended to register several Admin fingerprints and PIN codes.
5 Delete Admin Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Admin code Menu Press 8 Delete admin Press Finger or code Press admin finger or enter admin PIN code - 11 - Welcome Success
Keep Your Records Note: It is recommended to register several Admin fingerprints and PIN codes.
Keep Your Records Note: It is recommended to register several Admin fingerprints and PIN codes.
Note Date / /
U-tec and Ultraloq brands and products are trademarked and protected under law in the United States. Unauthorized use is prohibited. Ultraloq is sub-brand of U-tec Group Inc. 2016 © U-tec Group Inc. All Rights Reserved.
