Ultraloq UL3 Series Fingerprint and Touchscreen Smart Lock User Guide ( V1.
Operation Video Please watch our easy step by step installation video before attempting to install your Ultraloq UL3 Series Fingerprint and Touchscreen Smart Lock. www.u-tec.com/support If you have questions regarding the installation process, please contact us at support@u-tec.com Register Your Lock To ensure the best warranty coverage and customer service, please register your product at http://store.u-tec.
Lock Parts Exterior Touchscreen Fingerprint Reader Message Display Screen Backup Key Hole Restart Button Touchscreen: Used to enter the code and unlock from outside. Fingerprint Reader: Used to press finger and unlock from the outside. Message Display Screen: An OLED display with intuitive information will walk you through the whole operation. Backup Key Hole: Used to insert the key to unlock. Restart Button: Used to jump start the lock if activation fails.
Lock Operation Clean the fingerprint reader and touchscreen Use a microfiber cloth and wipe across the fingerprint reader surface and the touchscreen. Lock activation Press finger on fingerprint reader or touch lock with the back of hand or fingers. The lock will turn off again after 20 seconds if there are no other inputs. Open door from outside ① User PIN code 1. Touch lock with back of hand or fingers to activate the lock. 2. Input user PIN code to unlock. 3. Rotate handle and open the door.
② Fingerprint 1. Press finger on the fingerprint reader to activate and unlock. 2. Rotate the handle and open the door. ③ Smartphone (For Ultraloq UL3 BT only. ) Please refer to the guide in Ultraloq App. Open door from inside Rotate the handle and open the door. Replace battery When you activate the lock and see the message “Low battery”, you should replace the batteries. Use 3 high-quality alkaline AA batteries for replacement.
Vague Code Ultraloq UL3 Series supports up to 16-digit Vague Code. Just enter any 16-digit code, as long as a correct code is included in what you entered, you can open the door. Example User Code: 123456 Vague Code Method 1: 1 2 3 4 5 6 X X X X X X 2: X X X X X X 1 2 3 4 5 6 3: X X X 1 2 3 4 5 6 X X X Place Finger 1. Place a finger flat on the sensor’s surface. 2. Place a finger in the center of the sensor. * Please note the following factors may affect the fingerprint identification. 1.
Lock Programming Factory Defaults Factory default setting is that any fingerprint or PIN code can open the door. Register Admin and User Admin account must be created first before any other programming. Then use the Admin account to add or delete the other accounts. User PIN code User PIN code can be 4 to 8 numbers. User ID number User ID can be 1 to 8 numbers. Admin and User capacity You can register up to 95 fingerprints and 95 PIN codes.
Add Admin First Admin account must be created first prior to any other programming.
Add User Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 1 Welcome Admin code Menu Add user Press Enter user ID Enter user ID Finger or code Press finger or input a PIN code Enter again Press finger or input a PIN code Success -8-
Delete User Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 2 Press Enter user ID Enter user ID again -9- Welcome Admin code Menu Delete user Enter user ID Enter again Success
Add Admin Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Press 7 Press Welcome Admin code Menu Add admin Finger or code Press finger or input a PIN code Enter again Press finger or input a PIN code Success Note: It is recommended to register several Admin fingerprints and PIN codes.
Delete Admin Activate Lock Press and hold for 3 sec Press admin finger or enter admin PIN code Welcome Admin code Menu Press 8 Delete admin Press Finger or code Press admin finger or enter admin PIN code - 11 - Success
Passage Mode Ultraloq will stay unlocked for convenient free passage.
Lockout Mode Ultraloq can only be operated manually by the mechanical key. All electronic features including fingerprints and codes are turned off.
Keep Your Records Note: It is recommended to register several Admin fingerprints and PIN codes.
© 2016 U-tec Group Inc. U-tec and Ultraloq brands and products are trademarked and protected under law in the United States. Unauthorized use is prohibited. Ultraloq is sub-brand of U-tec Group Inc.
