Specifications

2. Ask the first person to hold. Then, hold down the and keys
and press the key to place the first person on hold. You will see
RECALL on the display followed by TYPE NAME, NUM, OR CR.
3. Dial the second number and begin your conversation.
4. Press + + to reconnect to the first person. You now have a
three-way calling conversation.
If the second number is busy, press + + to reconnect with
the first person.
NOTE: If someone calls you to set up a three-way conversation, you should press
+ + to be sure that you are using Baudot code. You may have
originally connected in Turbo Code and all three people in a three-way
conversation must be using Baudot code.
Transferring a Call + /DIAL
Office telephone systems vary widely and specifics of how to transfer a call will be
different for each system. Most telephone systems require a timed break recall to
transfer a call. On the Minicom 6000 Plus, typing an ‘!’ when you are dialling
sends a timed break recall.
Here is an example of typical steps required to transfer a call while you are on
the line with another person:
1. Press the Dial key ( + /
DIAL ). TYPE NAME, NUM, OR CR is
displayed
2. Type an exclamation mark (!) by holding down the key and pressing
the key.
3. Type the number of the extension to which you are transferring the call.
4. Press .
5. Press the Hangup key ( + /
HANGUP ) or turn off your Minicom
6000 Plus when you see the last number you dialled appear on the display.
The exact steps you need to follow will depend on your local telephone
system. Transferring a minicom call will require the same steps as transferring
a voice call.
2Ctrl
Return
1
Shift
1Ctrl
1
Ctrl
BShiftCtrl
FShiftCtrl
FShiftCtrl
F
ShiftCtrl
ADVANCED CALLING • 29