Specifications

Turning Off the Auto-Answer Relay Voice Announcer
+/
OPTIONS
When the Minicom 6000 Plus answers the telephone, it voices the Relay Voice
Announcer message before it sends your Auto-Answer Memo. If you do not want
the Minicom 6000 Plus to send the message, follow these steps to turn it off:
1. Press the Options key ( + /
OPTIONS ). PRINT (UP/LOW) CASE is
displayed.
2. Press until you see
AUTO-ANSW VOICE (ON) on the display.
3. Press the to change the setting to
(OFF).
4. Press to exit the Options menu.
This setting will remain off until you turn it on again.
Clearing Auto-Answer Messages + /CLEAR
Most of the time you will clear messages after you read them, but you can also
clear them by following these steps:
1. Press the Clear key ( + /
CLEAR ). CLEAR (CONVERSATION) is
displayed.
2. Press the to change the setting to
(AA MESSAGES).
3. Press .
CLEAR MESSAGES Y/N is displayed.
4. Press .
MESSAGES CLEARED is displayed. Press if you decide not
to clear your messages.
Retrieving Messages Remotely
Remote message retrieval allows you to use another minicom when you are away
from your Minicom 6000 Plus to read your Auto-Answer messages. Before you can
use remote message retrieval, you must save a password. The password prevents
others from reading your messages. You can only have one password per
household or office.
Saving a Password + /OPTIONS
1. Press the Options key ( + / OPTIONS ).
2. Press until you see
CHANGE AA PSWD (NO) on the display.
3. Press the to change the setting to
(YES).
Spacebar
Return
9Ctrl
9Ctrl
NY
Return
Spacebar
8Ctrl
8Ctrl
Esc
Spacebar
Return
9Ctrl
9Ctrl
AUTO-ANSWER • 43