Specifications

Setting Pulse Dialling + /OPTIONS
The Minicom 6000 Plus is set for tone dialling, which is correct for almost all
telephone lines. You can, however, change the setting to pulse dialling if your line
does not accept tone dialling.
Follow these steps to set pulse dialling:
1. Press the Options key ( + /
OPTIONS ). PRINT (UP/LOW) CASE is
displayed.
2. Press until
USING (TONE) DIAL is displayed.
3. Press the to change the setting to
(PULSE).
4. Press to save the setting and exit the Options menu or press to
save the setting and go to the next option.
Setting the Auto-Answer Rings + /OPTIONS
Follow the steps below to change the Auto-Answer rings setting to any number
between 2 and 9 or TS.
The TS setting is used with remote message retrieval. It tells the Minicom 6000
Plus to answer after 2 rings if you have messages or 5 rings if you do not. This
saves the cost of a call if you have no messages, because you can hang up after 3
rings.
1. Press the Options key ( + /
OPTIONS ). PRINT (UP/LOW) CASE is
displayed.
2. Press until
AUTO-ANSW RINGS (2) is displayed.
3. Press the to choose a number between
(2) and (9) or (TS).
4. Press to save the setting and exit the Options menu or press to
save the setting and go to the next option.
Return
Esc
Spacebar
Return
9Ctrl
9Ctrl
Return
Esc
Spacebar
Return
9Ctrl
9Ctrl
OPTIONS • 57