Specifications

Changing CCITT Seek Time + /OPTIONS
Follow these steps to set the length of time during which the Minicom 6000 Plus
sends out a CCITT seek tone. Normal minicom communication requires a seek
time of three seconds. You may need a longer seek time when you connect with a
computer. Six seconds is recommended.
1. Press the Options key ( + /
OPTIONS ). PRINT (UP/LOW) CASE is
displayed.
2. Press until you see
CCITT SEEK TIME (3) on the display.
3. Type a number to change the setting to
(0) or any number between (2) and
(9).
4. Press to save the setting and exit the Options menu or press to
save the setting and go to the next option.
NOTE: Selecting zero will turn off CCITT code and your Minicom 6000 Plus will
not try to use it even if the other minicom is using CCITT code.
Turning Off the Auto-Answer
Relay Voice Announcer + /
OPTIONS
Follow these steps to stop Auto-Answer from sending out the Relay Voice
Announcer message:
1. Press the Options key ( + /
OPTIONS ). PRINT (UP/LOW) CASE is
displayed.
2. Press until you see
AUTO ANSW VOICE (ON) on the display.
3. Press the to change the setting to
(OFF).
4. Press to save the setting and exit the Options menu or press to
save the setting and go to the next option.
Return
Esc
Spacebar
Return
9Ctrl
9Ctrl
Return
Esc
Return
9Ctrl
9Ctrl
62 • OPTIONS