Specifications

Setting CCITT Code + /CODE
0Ctrl
CODES • 65
1. Press the Code key
(+/
CODE ).
2. Press the until you
see (CCITT).
3. Press to select CCITT
(If you need to change a
CCITT default setting, see
Changing CCITT Settings on
the next page).
Return
Spacebar
0Ctrl
CCITT Settings and Computer Connections
If you use CCITT code often, you may need to change settings. You can change
the following settings on your Minicom 6000 Plus before or during your call:
Originate/Answer determines which machine is calling (originating) and
which machine is answering. The default is
(ORIGINATE).
Duplex controls how characters are displayed. If you get double characters
(lliikkee tthhiiss) or none at all, change the setting from
(FULL) to (HALF). The
default is
(HALF).
Parity controls how your Minicom 6000 Plus checks for errors. You can choose
(8N1) or (7E1). The default is (8N1).