Specifications

Return determines what the Minicom 6000 Plus sends when you press .
You can choose
(CR) or (CR+LF). (CR) (carriage return) goes to the beginning
of the current line.
(CR+LF) (carriage return plus line feed) goes to the
beginning of the next line. The default is
(CR).
Seek Time determines how many seconds the Minicom 6000 Plus tries to
connect in CCITT before it tries to connect in Baudot or Turbo. You can choose
2
to 9 seconds. The default is 3 seconds.
Changing CCITT Settings + /CODE
1. Press the Code key ( + /
CODE ). CODE (AUTOMATIC) is displayed.
2. Press the until you see
(CCITT).
3. Press to select CCITT.
CCITT (ORIGINATE) is displayed.
Use the following keys to change settings:
: select a setting
: continue to the next setting
: save the options and return to make your call
4. Press to save and exit CCITT settings and return to your text telephone
conversation.
Changing CCITT Seek Time + /OPTIONS
This option sets the length of time during which the Minicom 6000 Plus sends
out a CCITT seek tone. The normal text telephone seek time is three seconds. You
may need more time if you often connect to computers. Six seconds is
recommended. Follow these steps to change the setting:
1. Press the Options key ( + /
OPTIONS ). PRINT (UP/LOW) CASE is
displayed.
2. Press until you see
CCITT SEEK TIME (3) on the display.
3. Type a number to change the setting to
(0) or any number between (2) and
(9).
4. Press to save the setting and exit the Options menu.
NOTE: Selecting zero will turn off CCITT code and your Minicom 6000 Plus will
not try to use it even if the other minicom is using CCITT code.
Esc
Return
9Ctrl
9Ctrl
Esc
Esc
Return
Spacebar
Return
Spacebar
0Ctrl
0Ctrl
Return
66 • CODES