Specifications

Resetting the Minicom 6000 Plus

Resetting the Minicom 6000 Plus returns all options to their original settings and

clears all conversations, Auto-Answer messages, Memos and Directory entries.

Follow these steps to reset the Minicom 6000 Plus:

1. Press the left key, the right key, and the key

( + + ) all at the same time. You will see a version number

and

RESET Y/N on the display.

IMPORTANT! After the next step, everything in all memory will be cleared.

There is no way to get the contents back after you reset.

2. Press to reset. The display says

Minicom 6000 Plus IS RESET! Press

if you change your mind and decide not to reset the Minicom 6000 Plus.

Repair

If your Minicom 6000 Plus is not working the way you expect it to, we may be

able to help you solve the problem over the telephone. Call Teletec at the number

on the inside front cover.

Sending in the Minicom 6000 Plus for Service

Follow these steps if you need to send the Minicom 6000 Plus to Teletec or an

authorized Teletec service centre:

1. Pack it in the original shipping carton or a similar STURDY box.

2. Include a note that describes the problem. The note will help the technicians

find the problem more quickly.

3. Insure the Minicom 6000 Plus for shipment. Teletec or an authorized Teletec

service centre is not responsible for damage during shipping to the centre.

4. Send the Minicom 6000 Plus to the Teletec National Service Centre at the

address on the inside front cover of this manual.

CtrlShiftShift

76 • SERVICE