Silent Storm DMX Snow Machine Operator’s Manual www.ultratecfx.com VER. 30.10.
Table of Contents Introduction................................................................................. 3 Warning....................................................................................... 3 Important Safety Instructions:.................................................... 3 Technical Specifications.............................................................. 4 Technical Drawings.................................................................... 4 Operating Procedure...................
Introduction The Silent Storm is a snow machine, which can produce spectacular visual effects by creating an artificial snow flurry for distances of up to 40ft. The machine comes with a remote control and is DMX compatible. It is designed for applications requiring quite operation. It can be seated, or mounted on an optional truss mount bracket. Adjustable distance and volume of snow can be used to achieve different visual effects.
Technical Specifications Model: Silent Storm Part Number: CLS 7100 - 120 Volt - 10amps CLS 7150 - 220-240 Volt - 5amps Length: 23in Width: 10.125in 25.7cm Height: 10.1in 26.8cm Net Weight: 22lbs 10kg Net Weight w/ fluid: 32lbs 14.5kg Power Rating: 120 Volt A.C. 50/60 Hz. 10 Amps. 240 Volt A.C. 50/60 Hz. 5 Amps Fluid: Ultratec Special Effects Snow Fluid Technical Drawings 4 www.ultratecfx.com 58.
Operating Procedure The Silent Storm snow machine requires 120 volts AC at 10 amps (CLS 7100) or 220-240 Volts AC at 5 amps (CLS 7150). The unit can be operated from a wired hand held remote or from a DMX control signal. When DMX data is present the hand held remote is ignored. A valid DMX signal causes the LED to light on the rear of the machine. The blower starts before the pump, to allow it to come up to speed. When shut off, the blower runs for several seconds to purge the system.
Warranty Warranty: All warranty is for one year parts and labour unless specified or manufacturer defect only. Abuse or Poor Maintenance will not be covered under warranty. Ultratec Special Effects Fluids must always be used. Use of any non Ultratec Special Effects Fluids will void all warranties. Accept no substitutions as there are no exceptions to this rule. Proof of Purchase or Proof of Sale must always accompany any warranty returns.
