Specifications

www.ultratecfx.com
14
If the channel selections are not correct, press the arrow keys to highlight the incorrect entry. Then
press the >DELETE< key. The >DELETE< key will erase a channel number and the symbol (> + or E)
that follows .
Note that channel selections can be duplicated in the same Cue.
If channel selections are repeated in subsequent Cues, the controller will attempt to Fire the repeat-
ed channels again as they occur in the show.
Programming A Chase Fire Cue
A Chase Fire Cue is dened as a single channel, or Group of channels, called a ‘Stage’, separated by a
programmed Delay time.
Chase ‘Stages’ are displayed the same as a group re cue, with the channel numbers separated by
the > symbol.
The DELAY locations are indicated by the the ‘+’ symbol.
The programmed Delay time is inserted at each ‘+’ symbol when the cue program has been com-
pleted.
In Run Time, the channel(s) in the rst stage of the Chase are Fired at once, (ALL channels preceding
the rst ‘+’ symbol).
The program then pauses for the Delay time. (Delay time is selected during programming).
The next Stage of the Chase is Fired after the pause. The sequence continues until the -end symbol
(end of Cue).
During RUN, the FIRE button must be held down for the duration of the chase.
Channel selection is the same as for a Group Fire Cue.
Channels are selected for the rst stage of the Chase followed by >ENTER<.
As many channels as desired can be selected for each stage of the Chase and in any order.
To end the rst stage of the Chase select the rst channel from the second stage and press the
>CHASE< key. The + symbol will appear between the two stages denoting a delay.
Please note that the >CHASE< key will only function after a channel number and Not after the >EN-
TER< key.
The controller will insert the ‘+’ symbol to indicate that a Delay time will be inserted later in the pro-
gram.
· A sample stage selection appears as follows
1__108>609+114>316E-end
· A multi-stage Chase may appears as in the following example,
1__108>609+114>316>109+101+102+501>116>403+911E-end.