Specifications
www.ultratecfx.com
19
A Time Code Show is made up of Group Fire Cues ONLY.
A Chase Fire Cue can NOT be activated by MIDI and will NOT be allowed in program time code.
The MIDI Show control will activate and Fire cues in succession to simulate a Chase.
See the MIDI Show Control section for further explanation.
Program Operator Show Menu
> TC-1< --- empty --- TC-2 --- empty ---
TC-3 --- empty--- TC-4 --- empty ---
View-review Enter-edit Delete- erase
TC-1 through TC-4 correspond to T.C.1 through T.C.4 memory locations.
Using the arrow keys navigate to the memory location (TC-1 through TC-4) to be programmed.
>ENTER< starts edit/program mode. In an empty memory location the screen looks like:
1 -end --- End of Show ---
Channel Selection for a Group Fire MIDI Cue
A Group Fire is dened as a cue where all of the channels selected Fire at once.
1.) To select a channel for a Group Fire, turn the numerical encoder (1 to 9) and press a channel but-
ton.
The matching Numerical channel number is displayed on the LCD followed by -end.
2.) To accept the channel as part of the Group Fire Cue, press >ENTER< and -end will commence
ashing.
3.) Select another channel for a Group Fire, turn the numerical encoder (1 to 9) and press a channel
button. A > symbol will be displayed as a separator for each channel selected.
Repeat above steps to complete the channel group.