Owner's Manual

EN
12
Do not return defective or damaged product to the dealer. If your airgun needs
repair, call Umarex USA [phone] and ask for the Service Department
or visit www.umarexusa.com. DO NOT ATTEMPT TO DISASSEMBLE IT!
Your airgun requires special tools and xtures to repair it. Any disassembly or
modication not performed by Umarex USA will void the warranty.
CARE
WORKING PARTS: The gas piston requires very
little lubrication. Two (2) drops of RWS Air Chamber
Lube every 1000 shots will sufce. It is easily applied
through the compression chamber port with a 3 1/2"
applicator needle (see illustration 9). The wearing
surfaces at the barrel hinge, the cocking arm, and
the trigger mechanism should be lubricated with
RWS Spring Cylinder Oil (see illustration 10 & 11).
Remember, a little is good—a lot is not better.
BARREL: In day to day use, very little dirt or residue
will accumulate in the bore. Note: High quality RWS
Lead Pellets not only increase accuracy, they help to
reduce lead deposit. During periods of regular use
the bore of the barrel should be cleaned periodically
by means of a cleaning rod with wool mop. Insert rod
from breech end.
SURFACE: The exposed metal parts (receiver,
screw heads, trigger, etc.) are a gun blue nish and
MUST be wiped clean using a slightly oiled cloth after
handling to prevent rust. Use light acid free and resin
free oil. RWS Spring Cylinder Oil is excellent for this.
illustration 9
illustration 10
illustration 11
Check the tightness of the stock screws between, during,
and after shooting activity. Loose screws may cause injury or death.
WARNING
An airgun that is not operating properly may be
dangerous. It should be kept safely from use by anyone until repaired or
destroyed. Do not try to take the airgun apart. It is difficult to reassemble and
improper disassembly or reassembly can cause serious injury or death.
WARNING
The components of this airgun were engineered and manufactured to deliver optimum
performance. Any modification or tampering with an airgun may cause a malfunction, void
your warranty and may make it unsafe to use. Any change in performance (such as a lowered
trigger pull force and shortened trigger travel) indicates possible modification, tampering and/or
wear. Such airgun should be inspected, replaced, or properly repaired by only qualified Umarex
USA personnel. Any airgun that has been dropped should be checked by qualified personnel to
ensure that its function has not been affected.
CAUTION