Instructions Manual

 TIGHTEN THE BELT: (if the belt slips on the treadmill
when walking). Start treadmill and increase the speed to
3MPH.Using the
5mm Wrench
, turn both bolts 1/4
clockwise. If the belt is properly tight to walk, you must
be able to pull up each side of the belt 5 or 7 cm off the
platform. Be careful and maintain the belt aligned.
Repeat this procedure until the belt is properly
tightened.
 TIGHTEN THE DRIVE BELT:if the drive belt becomes
loose after using for a period of time,you need to:
(1) Open the motor cover .
(2) Use the 5mm wrench to turn the adjusting
bolt clockwise.
Repeat this procedure until the drive belt is not slippery
anymore.
 CLEANING: Don't use abrasive products. A damp cloth is enough.
 LEVELING: If your unit is provided with leveling wheels, please adjust them
in order to avoid vibrations and therefore malfunctions.
 KEEP THESE MAINTENANCE ADVISES FOR FUTURE REFERENCES
if the running belt slips,use 6mm wrench,turn
both sides bolts 1/4 clockwise.Repeat this
procedure until the belt is properly tightened.
Adjusting bolt