User's Manual

Page 22 of 79
2. Observe the battery contacts and match the contacts to the
corresponding parts in the battery cabin. Put the other side into
the cabin and push the battery till it is completely fitted.
3. Slide the back cover into its place firmly.
4.4
Battery Charging
The new battery is not fully charged. You need to install and charge
the battery before using the device. In general conditions, the new
battery will work under best condition after several times of charge
and discharge.
♦ Connect the plug of the charger to the charger connector of the
device.
♦ Connect the other plug of the charger to the proper power
supply socket.
♦ When the display shows “charge complete”, pull out the
plug of the charger from the charger connector of the device