Technical Specs

6 / 12
UMindSleep APP
b) Open the mobile APP, click "user registration" for new users, set the account and
password as required, and complete the registration.
c) After completing the registration, enter the account and password you set in the login
interface to complete the user login.
d) If you forget your password during login, click reset password on the interface and
complete the new password setting according to the prompts of the APP.
3) Mobile terminal connection equipment
This product is connected to the mobile terminal through Bluetooth. The operation steps are
as follows:
a) Turn on the mobile phone Bluetooth (some mobile terminal systems need to turn on the
positioning function of the application to use the Bluetooth function).
b) According to the guidance of the APP, connect the sleep meter at the interface point after
login, and select the last four digits of the device serial number (SN code) from the device list.
c) After the connection is successful, the indicator light of the device will flash slowly in
green.
d) If the connection fails, refer to "common fault handling" in this manual.
4) Equipment - monitoring operation steps
a) Please ensure that the host has sufficient power before use.
b) Please clean and dry the forehead skin before wearing.
c) Tear off the release film on the surface of the equipment, and align the electrode with the
area a of the equipment and stick it tightly.
d) Press the device logo and release it. If the green light is on, the device will be powered on.
e) Tear off the release film on the forehead of the electrode paste to expose the gel.
f) The opening of the logo of the host is upward, and it is pasted and pressed in the center of
the forehead.
g) Open the APP to connect the device, and the slide monitoring module starts monitoring