Operating instructions

Unpacking and setting up the balance
5
2 Unpacking and setting up the balance
This chapter provides information about unpacking and setting up your balance. This information is limited to the special features
of MX5-S/UMX2-S automated balances, therefore please note the cross-references to the operating instructions for AX and MX/UMX
balances.
2.1 Unpacking the balance
Carefully unpack your balance. Note: The packaging of MX5-S/UMX2-S automated balances differs from that of MX/UMX balances.
2.2 Checking the scope of delivery
Please check that the following items have been provided (please also refer to the illustrations in the device overview at the beginning
of these instructions):
– Control unit with terminal installed
– Fully assembled weighing cell (drip tray, weighing pan, weighing sample holder, weighing chamber cover)
– Metal protective cover
– Positioning plate (without assembly material)
– AC adapter with country-specific power cable
– Connection cable for connecting the control unit and weighing cell
– Protective cover for the terminal
– Cleaning brush
– Cleaning tweezers
– Weighing tweezers
– Special tool for inserting and removing the weighing pan and the weighing sample holder
– 1 weighing sample holder and 1 weighing pan as spare parts
– Production certificates
– CE declaration of conformity
– Supplementary operating instructions for MX5S automated and UMX2-S automated (this document)
– Operating instructions for AX and MX/UMX balances
2.3 Selecting a location
Select a suitable location for the balance. Please observe the instructions in the operating instructions for AX and MX/UMX balances.