User guide

12
• While the baery is charging, the baery symbol will gradually scan from right to le.
• A new baery must be fully charged before it is used for the rst me.
• To keep the baery funconing opmally, it is recommended that you occasionally discharge the baery
fully by consuming the power unl the phone is switched o automacally.
• During the course of charging, it is normal for the phone and the baery to heat up slightly. The phone
will automatically protect itself when battery temperature rises to control temperature variation by
extending the charging me.
• The handset will give an alert as the baery is running out. When the power has run out, the handset
will be switched o automacally.
• Actual me of usage of the baery varies according to dierent operaon modes and sengs of network
base staon. If you use the phone when baery is rather low, the phone may switch o automacally.
• You may choose to charge the baery under power-o or standby state. If the phone is charged under
power-o state, it will start and display the graphic denong that the unit is charging.
• When the baery is fully charged, charging operaon stops automacally. The baery symbol on the
screen will maintain a graphic showing that the baery is full. At this me, please unplug the charging
cable.
• Calls can be made while charging.
MicroSD Card Loading
The MicroSD card slot is located underneath the baery. Please follow the baery installaon instrucons
above to access the MicroSD card slot. The MicroSD card slot is located in the upper right corner of the baery
well.