User guide

17
6. Basic Operaons
Turning on the phone
Press the End/On/O key and hold for 5-6 seconds. The phone will automacally search the network as long as
the phone has no password protecon. Aer the phone has registered on the network, the signal strength will
be displayed at the top right corner of the screen. The phone is now in the standby state and you can make or
answer a call.
Your phone remains in a searching state if it fails to nd the available network system.
If a password for the phone is required aer it is switched on, please input the password, and then press the
right so key for conrmaon. Aer unlocking, the phone will display the signal strength.
Turning o the phone
Press the End/On/O key and hold for 5-6 seconds.
Warning: If you switch o the phone by removing the baery, you may lose stored informaon.
Answering a call
Press the Answer/Send key.
Dialing a phone number
In the standby state, enter the telephone number (include country and area codes if necessary) and press the
Answer/Send key.
Rejecng an incoming call
Press the End/On/O key.