User guide
38
• Blacklist: You can set up a blacklist. Aer enabling the blacklist, the phone numbers listed in the blacklist
will not be able to call this phone.
o Status: Disable/Enable.
o Blacklist List: Up to nine blacklisted entries can be added. You can edit the list through this menu.
Security Setup
To make changes in the Security menu, you must correctly input the phone password. The inial password is
1234.
• Phone Lock: If “Enabled”, when the phone is powered on you will be prompted to enter the phone’s
password correctly to use the phone.
• Keypad Lock: The keypad lock can be set to be enabled aer 5 seconds, 30 seconds, 60 seconds, or
5 minutes. To unlock the keypad, press “*” then the Answer/Send key. Even when locked, you may
answer an incoming call.
• Call History Lock: If enabled the phone will require the password to be entered each me you access the
phone’s Call History.
• Phonebook Lock: If enabled, the phonebook cannot be viewed unl the password is entered.
• Message Lock: If enabled, the phone will require the password to be entered to access messages.
• Change Password: Change the password using this opon. The Old Password must be entered before a
new one is accepted. Enter the same new password twice and press the le so/menu key to conrm.
The new password will then become eecve. During this course you may press the right so key to
discard the change at any me and return to higher-level menu. You can create separate passwords for
the phone lock, the call history lock, the phonebook lock, and the message lock.
• Restore Factory Sengs: This funcon is used for restoring to the default factory sengs.