Owner`s manual

<< Troubleshooting
12. ADDITIONAL INFORMATION
To set time 1. There is no need to set up the clock manually as UNAVI is linked to the GPS signal.
2. Check to see there is GPS signal reception
3. Re-install program to resolve possible program errors
4. Otherwise, some vehicle models may require the user to manually configure the clock
displayed on the audio screen by going into the SETUP menu.
Bluetooth setup (instructions
may vary depending on the
vehicle model)
Press SETUP > Select PHONE or Bluetooth using the TUNE buttons (for complete
instructions, please refer to the factory Owner’s Manual or the built-in eBook manual.
System does not go past the
boot-up screen
Please visit www.unavi-usa.com to download the NK.bin file from our “Service & Support”
section
System does not boot up 1. Check that power cables are properly connected
2. Reboot the system using the Reset button located on the SD Card control box
Critical error message displays
and fails to initialize
1. Check to see the SD Card is properly inserted
2. Re-install the program and map files
MS Windows OS screen is
displayed
This is a result of the program files being deleted from memory and require program re-
installation
Broken image display 1. Broken images in the map screen indicate corrupt map files. Please update the map
files.
2. Broken images in non-map screens indicate corrupt program files and require program
re-installation.
40