Operation Manual

40
3-2. CUSTOMIZE LOGO / SPLASH SCREEN
SPLASH SCREEN
03. Other Features & Updates
1. Make sure that the image le is saved on your computer using the correct name and format from the previous page.
2. Eject SD Card from the Multi-Box (while your system is turned OFF) and insert it into your PC with a microSD card adapter.
3. Load the “BootLogo.bmp” le that you created onto the Z80 folder in the SD Card directory.
4. Insert the SD Card back into the Multi-Box (Make sure to properly ‘Eject’ the SD Card drive prior to removing it from the computer).
5. Turn on the Unavi system. If the above procedures are followed, your splash screen will have changed automatically upon startup.
Once you have created an image le to use as the splash screen, please follow the steps below to apply the changes.