Beaten MODELS: Pets 300 AIR PURIFIER USER MANUAL Please read this instruction carefully and keep it for future reference.
Hm READ AND SAVE THESE INSTRUCTIONS Bm CATALOG Safety information Troubleshooting Product structure Guidance for usage Product feature Operation instructions Filter replacement
Em NOTICE To avoid harm or property damage, please be sure to observe the following rules and instructions.
EH SAFETY INFORMATION + Use only standard socket that meet the standard voltage written on the nameplate. * Please do not use the device if the power cord/plug/socket has been damaged, and ask the manufacturer or professional to replace it. + To veld any electrics shocks or fire caused by circuit, when unplugging the power plug, please clench the plug. Do no pull the power cord. Restrictions On Use + There is oil residue in the room, please do not use the device.
EH SAFETY INFORMATION This appliance has a polarized plug {one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
BH TROUBLESHOOTING If your air purifier does not run smoothly, please check the following before maintenance. not In position. Phenomenon Possible reason Solution A. Reconnect power Machine can o pried re pug. plug. not start : B. B. Re-Install the rear cover in position. Odor In the outlet A. More pollutants In the room stitch as more smoking B. Filter is polluted severely A. Iris recommended that the room alr be changed. B. Replace with a brand new fitter.
BH PRODUCT STRUCTURE Air outlet tl = Buckle/ Handle --8 Sensor +o Middle frame Front Panel |iuimimbiinies ff) @memes Air inlet BH TECHNICAL PARAMETERS Product Name Arr purifier Model Pets 300 Rated Voltage AC120V/60Hz Brand Unbeaten Input Power BEW Nice <61dB(A) Product Size Gross Weight 137b
HB GUIDANCE FOR USAGE 1 Unpack the machine 2: Remove the front panel © 3: Take down the filters and remove the poly bags 4: Put the composite filter into 5: Close the front panel properly.
EH PRODUCT FEATURE slate ih Composite fleeter mesh Purification process of fitter mesh Composite filter mesh can firstly filter out large contamination particles such as hairs and pet hairs, and then can effectively remove minor contamination particles such as 2.5 and PM smog through high efficient filter mesh.
Hm OPERATION INSTRUCTIONS ele el bel ee "SPEED" button, showing the fan speed levels. * Fan speed switches from + Means auto mode, fan speed changes via alr quality. "Timer" button to show time setting. *» Time setting can switch from 1h™12h. = Rawer on state, touch“ TIMER” to turn off the unit. » Stand-by state, turn on the unit. ‘ON/OFF, to turn on/turn off the unit. = After tum on the unit, 30s preheat will show and the icons light turn green, "SLEEP" + When only this icon light on, others not.
HB FILTER REPLACEMENT Gee ele eel Tey ee 1. Tum down the unit plug off the power cord. 2. Open the fitter cover After the unit is powered off, catch the buckle position of the filter cover and pull it out. 3. Please take out the composite filter, = and pack the used filter into bag to = avoid any second pollution. A. The preliminary filter can be cleaned and reused. B. The combination filter that reaching its service life cannot be reused even if it is clean. Please treat it as non-burnable waste.
JOIN THE COMMUNITY See what others are thinking and share your user experience with the community (f) Unbeaten official ® Unbeaten Purifier Deliberateness NEED MORE HELP? Contact support at: Take best care of your Unbeaten please go to: www.unbeatengroup.
